[gipfeli]

I'm currently testing out a small robot arm from China (mirobot), and needed to import the .stl files into RoboDK

- stl files:https://github.com/wlkata/Mirobot-STL
- Manual (parameter):https://lin-nice.github.io/mirobot_gitbo...lkata.html

The parts are not rendered (No problem with .robot files from library). The workspace however is displayed.

Any help would be very appreciated.

Thank you and have a nice day.

[Jeremy]

Hi Gipfeli,

Can you provide the .rdk file you used.

Jeremy

[gipfeli]

Hi Gipfeli,

Can you provide the .rdk file you used.

Jeremy

Sure, here you go.https://drive.google.com/file/d/18yYSX2c...sp=sharing

Thank you very much.

[Jeremy]

Hi Gipfeli,

I'm not so sure what's going on, but your mesh (.stl) smees a bit broken.
I tried opening them with a CAD software (Fusion 360) and the result was quite strange.

Could you save the parts as either .step or .iges instead of .stl?
I would recommend those formats over .stl.

Jeremy